**Somfy Idler End Cap (for 56mm Tube) – Smooth Rotation Support Solution**
The **Somfy Idler End Cap** provides **low-friction support** for motor shafts in 56mm tubes, featuring a **maintenance-free nylon bearing** for quiet operation in roller shutter and awning systems.
### **Key Features:**
- **56mm Tube Fit** – Precision-engineered for perfect alignment
- **Nylon Bearing** – Self-lubricating for silent operation
- **10mm Shaft Compatibility** – Fits standard motor shafts
- **Stainless Steel Hardware** – Included M5 screw for secure mounting
- **Corrosion-Resistant** – UV-stabilized polymer construction
- **Tool-Free Installation** – Snap-fit design with screw security
### **Technical Specifications:**
- **Bearing Material:** Glass-reinforced nylon (PA66-GF30)
- **Body Material:** Engineering polymer
- **Temperature Range:** -30°C to +80°C
- **Load Capacity:** 25kg radial / 10kg axial
### **Ideal For:**
✔ Sonesse 50 motor installations
✔ Commercial roller shutters
✔ High-cycle applications
✔ Noise-sensitive environments
**Upgrade to maintenance-free shaft support!**
*(Word count: ~150)*
---
**Why Choose This End Cap?**
- **Reduces Wear** – Prevents metal-on-metal contact
- **Easy Installation** – No special tools required
- **Long-Lasting** – Withstands 50,000+ cycles
*(Additional word count: ~30)*
---
**Package Includes:**
1 × Idler end cap
1 × M5×10mm stainless screw
1 × Installation guide
*(Total word count: ~180)*
**Somfy Idler End Cap (for 56mm Tube) – Technical Specifications**
### **Mechanical Specifications:**
- **Tube Compatibility:** 56mm OD (+0.2/-0mm tolerance)
- **Bearing Type:** Self-lubricating composite bushing
- **Material:** Glass-reinforced nylon (PA66-GF30)
- **ID:** 10.0mm (+0/-0.02mm)
- **OD:** 16mm press-fit
- **PV Limit:** 0.3 MPa·m/s
- **Body Material:** UV-stabilized polyamide (PA6)
### **Performance Specifications:**
- **Load Capacity:**
- **Radial Load:** 25kg dynamic / 40kg static
- **Axial Load:** 10kg max
- **Friction Coefficient:** μ=0.15-0.20 (dry)
- **Rotation Speed:** ≤100 RPM continuous
- **Noise Reduction:** ≤4dB(A) vibration damping
### **Installation Specifications:**
- **Mounting Method:**
- Snap-fit tube insertion
- M5×10mm security screw (included)
- **Torque Requirements:** 2.5Nm (for M5 screw)
- **Tool Requirements:** 4mm hex key (not included)
### **Physical Dimensions:**
- **Overall Length:** 25mm
- **Flange Diameter:** 56.5mm
- **Bearing Projection:** 12mm
- **Weight:** 45g
### **Environmental Ratings:**
- **IP Rating:** IP44 (splash resistant)
- **Operating Temp:** -30°C to +80°C
- **UV Resistance:** 2000h QUV tested
### **Compatibility:**
- **Motor Shafts:** 9.8-10.2mm diameter
- **Tube Types:**
- Aluminum (1.5-3mm wall)
- Steel
- Composite
### **Certifications:**
- **CE Marked**
- **RoHS 3 Compliant**
- **REACH Compliant**
### **Package Includes:**
1 × Idler end cap (pre-assembled)
1 × M5×10mm stainless screw
1 × Installation leaflet
*(Word count: ~220)*
**Installation Notes:**
1. Verify shaft diameter (9.98-10.02mm) before installation
2. Apply silicone grease to tube OD for easier insertion
3. Replace if bearing ID exceeds 10.1mm
4. Not for use with impact tools
**Key Advantages:**
✔ 50% lower friction than standard bushings
✔ Laser-measured bore precision
✔ Withstands 100,000+ rotations
✔ Maintenance-free operation
%20.jpg)